Cottage Double Driveway Gates — Flat Top
Need a size we don't list? Request a bespoke quote
Pair of gates only. Add hardware below if you need it.
About this gate
A matched pair of cottage driveway gates with a straight top rail. Solid tongue and groove boarding across the lower half of each leaf, turned timber bars above.
The open section is what makes a cottage gate. On a driveway it stops a wide pair reading as a wall across the front of a house — light and air pass through, and you can see who is at the gate before you open it. Below the bars the boarding still gives you a solid base and privacy at ground level. The open bar section is 330mm deep on each leaf.
All timber, bars included. Nothing bought in that can fade, rust or weather at a different rate to the gates around it.
Supplied as a pair, one left and one right. The width you choose is the total finished width of both gates together — a 2700mm pair is two gates of 1350mm each. Take 40mm off your opening when choosing a size (see How to measure).
Specification
Construction
Framed and ledged pair with timber bar top section. Diagonal brace on 1500mm and 1800mm high gates.
Timber
C24 graded, pressure treated, screw-fixed frame
Thickness
47mm
Finish supplied
Natural — not stained or painted, ready to paint or stain
Opening direction
Left and right pair
Height measured
At the sides
Size tolerance
±10mm on width and height
Recommended posts
100 x 100mm up to 2400mm wide, 150 x 150mm over 2400mm (posts not supplied)
Maximum leaf width
1800mm per leaf
Made in
United Kingdom
Delivery
Free delivery to most of England and Wales. A surcharge applies to Central London, parts of Devon, Cornwall, parts of Wales and Northumberland, Scotland, Northern Ireland and the islands. You'll see it at checkout when you enter your postcode.
Your gate is made to order and takes 10 working days to build, then 3 to 5 working days for delivery.
Our carrier will contact you by email and text to arrange delivery, which is why we ask for a phone number at checkout. Please make sure there is safe access and someone available to receive the delivery.
Prefer to collect? Choose collection at checkout and pick up from our workshop at Unit 3, Southdown Farm, near Swindon (SN7 7UA).
How to measure
Standard sizes
The size you choose is the finished size of the gate. We build exactly what you order.
Measure your opening at the top, the middle and the bottom, and use the smallest of the three. Openings are rarely square.
Take off 20mm for a garden gate, or 40mm for a pair of driveway gates, to leave room for hinges, latch and movement. Then choose the nearest size at or below that. A 920mm opening needs a 900mm gate.
Driveway gate widths are the total for the pair, so a 2400mm pair is two 1200mm gates.
Height is measured at the sides, so on curved tops the curve rises above it. Featheredge dome top gates are the exception: their height is measured to the top of the dome. All gates are built to ±10mm.
Bespoke sizes
If your opening doesn't suit a standard size, request a bespoke quote. Send us the opening measurements and we'll work out the clearances for you.
Returns
Standard size gates can be cancelled within 14 days of delivery under the Consumer Contracts Regulations 2013. You are responsible for the cost of returning the goods; we can arrange collection and deduct the cost from your refund.
Gates made to your own measurements through our bespoke process are exempt from the 14-day right to cancel.
Timber is a natural material. Variation in grain, colour and knot pattern is normal, as is minor seasonal movement, and neither is a defect. Your statutory rights if a gate is faulty or not as described are unaffected.