Tongue and groove dome top garden gate with a black bar section above solid boarding

Tongue & Groove Garden Gate — Dome Top, Black Bars

600mm / 900mm (3ft)
£99.99
Skip to product information
Tongue and groove dome top garden gate with a black bar section above solid boarding

Tongue & Groove Garden Gate — Dome Top, Black Bars

£99.99

Need a size we don't list? Request a bespoke quote

Gate only. Add our side gate kit below (hinges, latch, lock bolt, screws and fixings) if you need it.

About this gate

A tongue and groove garden gate with a curved top and an open bar section beneath it. Smooth interlocking boards across the lower half, slim black bars above, and a dome across the top.

It is one of our most popular shapes — the one that matches the dome top fence panels most merchants stock — and the bar section stops a tall gate reading as a solid wall at the front of a house.

The bars are black rigid PVC rather than timber. They hold their colour, never need treating, and will not move with the seasons the way a turned timber bar can. Against a painted or stained gate they read as ironwork. The open bar section is 250mm deep on every gate height, so on a shorter gate it takes up more of the gate than on a tall one.

Built in widths from 600mm to 1200mm and heights from 900mm to 1800mm. Height is measured at the sides; the dome rises above this. Every size is the finished size of the gate, so take 20mm off your opening when choosing (see How to measure). Bespoke sizes are made to your measurements.

Specification

Construction
Framed and ledged with capped top rail and 250mm black PVC bar section. Diagonal brace on 1500mm and 1800mm high gates over 700mm wide.

Timber
C24 graded, pressure treated, screw-fixed frame

Thickness
47mm

Finish supplied
Natural — not stained or painted, ready to paint or stain

Opening direction
Either - universal hanging

Height measured
At the sides — the dome rises above this

Size tolerance
±10mm on width and height

Recommended posts
75 x 75mm or 100 x 100mm (posts not supplied)

Maximum leaf width
1200mm

Made in
United Kingdom

Delivery

Free delivery to most of England and Wales. A surcharge applies to Central London, parts of Devon, Cornwall, parts of Wales and Northumberland, Scotland, Northern Ireland and the islands. You'll see it at checkout when you enter your postcode.

Your gate is made to order and takes 10 working days to build, then 3 to 5 working days for delivery.

Our carrier will contact you by email and text to arrange delivery, which is why we ask for a phone number at checkout. Please make sure there is safe access and someone available to receive the delivery.

Prefer to collect? Choose collection at checkout and pick up from our workshop at Unit 3, Southdown Farm, near Swindon (SN7 7UA).

Full delivery information

How to measure

Standard sizes

The size you choose is the finished size of the gate. We build exactly what you order.

Measure your opening at the top, the middle and the bottom, and use the smallest of the three. Openings are rarely square.

Take off 20mm for a garden gate, or 40mm for a pair of driveway gates, to leave room for hinges, latch and movement. Then choose the nearest size at or below that. A 920mm opening needs a 900mm gate.

Driveway gate widths are the total for the pair, so a 2400mm pair is two 1200mm gates.

Height is measured at the sides, so on curved tops the curve rises above it. Featheredge dome top gates are the exception: their height is measured to the top of the dome. All gates are built to ±10mm.

Bespoke sizes

If your opening doesn't suit a standard size, request a bespoke quote. Send us the opening measurements and we'll work out the clearances for you.

Full measuring guide

Returns

Standard size gates can be cancelled within 14 days of delivery under the Consumer Contracts Regulations 2013. You are responsible for the cost of returning the goods; we can arrange collection and deduct the cost from your refund.

Gates made to your own measurements through our bespoke process are exempt from the 14-day right to cancel.

Timber is a natural material. Variation in grain, colour and knot pattern is normal, as is minor seasonal movement, and neither is a defect. Your statutory rights if a gate is faulty or not as described are unaffected.

Full returns policy

You might also like