Pair of tongue and groove double driveway gates with smooth boarded faces

Tongue & Groove Double Driveway Gates

1500mm / 900mm (3ft)
£319.99
Skip to product information
Pair of tongue and groove double driveway gates with smooth boarded faces

Tongue & Groove Double Driveway Gates

£319.99

Need a size we don't list? Request a bespoke quote

Pair of gates only. Add hardware below if you need it.

About this gate

A matched pair of tongue and groove driveway gates, hand-built to order. Smooth interlocking boards meeting in a chamfered V-groove, on framed and ledged back frames with a straight top rail.

The cleaner of our two boarding types. Where featheredge reads rustic and matches closeboard fencing, tongue and groove reads modern and suits rendered walls, painted finishes and newer boundaries. Full height boarding, so complete privacy across the opening.

The top edge of each leaf is capped to protect the exposed end grain — the detail that determines how long a tongue and groove gate lasts outdoors.

Supplied as a pair, one left and one right. The width you choose is the total finished width of both gates together — a 2700mm pair is two gates of 1350mm each. Take 40mm off your opening when choosing a size (see How to measure).

Specification

Construction
Framed and ledged pair with capped top rail. Diagonal brace on 1500mm and 1800mm high gates.

Timber
C24 graded, pressure treated, screw-fixed frame

Thickness
47mm

Finish supplied
Natural — not stained or painted, ready to paint or stain

Opening direction
Left and right pair

Height measured
At the sides

Size tolerance
±10mm on width and height

Recommended posts
100 x 100mm up to 2400mm wide, 150 x 150mm over 2400mm (posts not supplied)

Maximum leaf width
1800mm per leaf

Made in
United Kingdom

Delivery

Free delivery to most of England and Wales. A surcharge applies to Central London, parts of Devon, Cornwall, parts of Wales and Northumberland, Scotland, Northern Ireland and the islands. You'll see it at checkout when you enter your postcode.

Your gate is made to order and takes 10 working days to build, then 3 to 5 working days for delivery.

Our carrier will contact you by email and text to arrange delivery, which is why we ask for a phone number at checkout. Please make sure there is safe access and someone available to receive the delivery.

Prefer to collect? Choose collection at checkout and pick up from our workshop at Unit 3, Southdown Farm, near Swindon (SN7 7UA).

Full delivery information

How to measure

Standard sizes

The size you choose is the finished size of the gate. We build exactly what you order.

Measure your opening at the top, the middle and the bottom, and use the smallest of the three. Openings are rarely square.

Take off 20mm for a garden gate, or 40mm for a pair of driveway gates, to leave room for hinges, latch and movement. Then choose the nearest size at or below that. A 920mm opening needs a 900mm gate.

Driveway gate widths are the total for the pair, so a 2400mm pair is two 1200mm gates.

Height is measured at the sides, so on curved tops the curve rises above it. Featheredge dome top gates are the exception: their height is measured to the top of the dome. All gates are built to ±10mm.

Bespoke sizes

If your opening doesn't suit a standard size, request a bespoke quote. Send us the opening measurements and we'll work out the clearances for you.

Full measuring guide

Returns

Standard size gates can be cancelled within 14 days of delivery under the Consumer Contracts Regulations 2013. You are responsible for the cost of returning the goods; we can arrange collection and deduct the cost from your refund.

Gates made to your own measurements through our bespoke process are exempt from the 14-day right to cancel.

Timber is a natural material. Variation in grain, colour and knot pattern is normal, as is minor seasonal movement, and neither is a defect. Your statutory rights if a gate is faulty or not as described are unaffected.

Full returns policy

You might also like